November 2020

InspecS® – Inspection covers for safety floorings

Inspecs® - Inspection inserts for safety surfaces are ready-to-install inserts for safety surfaces and offer many advantages for the maintenance of the regularly inspected foundation points according to the Euroepan standard DIN EN 1176-1:2017.

For new construction measures, the inspection insert is positioned around playground equipment posts on the upper edge of the fall protection surface to be installed and seamlessly integrated in such a way that a removable maintenance unit is created that is flush with the ground. This allows the inspector to simply open the foundation point at times and thus carry out an unrestricted inspection of the underlying foundation points. After the inspection, the inspection insert is simply returned to its original position. There are no yearly recurring construction costs and the installation does not have to be blocked for the inspect posts.

Clever advantages through InspecS® - inspection missions


Continuous fall protection properties according to DIN EN 1177: 2018-03; seamlessly embedded


Spontaneous testing possible without logistical preparation during operation


Can be produced for different post geometries and diameters


The revision key enables the annual inspection and thus secures use during the whole year

Take advantage of the clever benefits of the InspecS® - revision inserts!


Technical Information about InspecS®